Code: 6100
Description: Broken fuser heater wire
Fuser thermistor 5 won’t reach the reference temperature in 480 s after shifting to low power mode.
Fuser thermistor 5 won’t reach the reference temperature in 480 s after shifting to low power mode.
Causes: Defective connector cable or poor contact in the connector.
Deformed connector pin.
Defective triac.
Broken fuser thermistor 5 wire.
Defective engine PWB.
Deformed connector pin.
Defective triac.
Broken fuser thermistor 5 wire.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Fuser unit and engine PWB (YC26)
Broken fuser thermistor 5 wire. Replace the fuser unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Broken fuser thermistor 5 wire. Replace the fuser unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.