Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8010 — Kyocera TASKalfa 8000i

Code: 8010

Description: Punch motor error 1
When the punch motor is driven, punch home position sensor does not turn on within 200 ms.
Causes: Defective connector cable or poor contact in the connector.
Defective punch home position sensor.
Defective punch motor.
Defective PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Punch motor and punch PWB (YC4) Punch home position sensor and punch PWB (YC8) Punch PWB (YC1) and DF main PWB (YC7)
Defective punch home position sensor. Replace the punch home position sensor.
Defective punch motor. Replace the punch motor.
Defective PWB. Replace the punch PWB or DF main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 8000i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie