Code: C2250
Description: Cleaning motor error
• LOCK signal remains high for 1 s, 200 ms after the cleaning motor has turned on.
• LOCK signal remains high for 1 s, 200 ms after the cleaning motor has turned on.
Causes: Poor contact in the drive motor connector terminals.
Defective cleaning motor rotation control circuit.
Defective drive transmission system.
Defective engine PWB.
Defective cleaning motor rotation control circuit.
Defective drive transmission system.
Defective engine PWB.
Remedy: Poor contact in the drive motor connector terminals. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective cleaning motor rotation control circuit. Replace the cleaning motor.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Replace the engine PWB.
Defective cleaning motor rotation control circuit. Replace the cleaning motor.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Replace the engine PWB.