Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C5500 — Kyocera TASKalfa 820

Code: C5500

Description: Drum surface potential sensor problem 1
• The sensor output is 0.5 V or less when MC REM signal is turned on.
Causes: Poor contact in the drum surface potential sensor connector terminals.
Defective drum surface potential sensor.
Defective high voltage PWB.
Defective engine PWB.
Remedy: Poor contact in the drum surface potential sensor connector terminals. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.
Defective drum surface potential sensor. Replace the drum surface potential sensor.
Defective high voltage PWB. Replace the high voltage PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 820

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie