Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC 724 — Ricoh Aficio CL7000

Code: SC 724

Description: Finisher staple hammer motor error Stapling does not finish within 150 ms after the staple hammer motor turns on.
Causes: • Staple jam • Loose connection • Overload caused by stapling too many pages • Defective staple hammer motor
Remedy: 1. Turn the main switch off and on. 2. Check if the staple hammer motor connector is properly connected. 3. Check if the staple jam occurs. 4. Replace the staple hammer motor.

← Xem tất cả mã lỗi Ricoh Aficio CL7000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie