Code: 0500
Description: Fuser warm-up failure
• The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
• The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
Remedy: 1 Change fuser unit. 2 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following ten keys in this order 2-6-2-3-7. 4. Main switch is turned OFF/ON. 3 Change PRCB. 4 Change DCPU.