Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 18 — Konica-Minolta Magicolor 2300W

Code: 18

Description: • If the unit does reach 80° C within 100 seconds from the time that warm-up begins • If the temperature of the fusing roller falls below 70° C in 10 seconds during standby • If the temperature of the fusing roller increases to 220°C in 0.1 second
Remedy: 1 Check for continuity at H1 and H2. NO Replace H1 and H2. 2-B, 2-C 2 Check for continuity at TS1. NO Replace TS1. 2-C. 3 Is the resistance at TH1 infinite? (between CN18-1 and -2 on the thermistor) YES Clean TH1 or replace the fusing unit. HEATER 2-D NO Replace PU. Replace PWB-A.1

← Xem tất cả mã lỗi Konica-Minolta Magicolor 2300W

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie