Code: 3FFF
Description: Flash ROM write error
• The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware. • When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display. • If this error message appears, no operations can then be performed. It is not possible to upgrade the firmware from a PC connected through USB connection, either.
• The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware. • When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display. • If this error message appears, no operations can then be performed. It is not possible to upgrade the firmware from a PC connected through USB connection, either.
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Rewrite the firmware. 4 Unplug parameter chip from PRCB and then plug it back in. 5 Change PRCB. 6 Change MFPB/1.