Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC302 — Ricoh Aficio Color 3006

Code: SC302

Description: Charge corona grid voltage error - Timing - When the charge corona unit grid is on during printing or process control - Condition - The feedback voltage is 4.8V or higher, or the PMW value is 50% or higher for 500 ms continuously.
Causes: • Charge corona unit not installed properly • Poor connection of cables • Defective high voltage supply board (C,G) • Defective I/O control board • Defective main control board.
Remedy: 1. Reinstall the charge corona unit properly or replace the charge corona unit. 2. Reconnect the connectors on the high voltage supply board (C,G), I/O control board, and main control board, or check the cables. 3. Check and clean the charge corona unit receptacle. 4. Replace the high voltage supply board (C,G). 5. Replace the I/O control board. 6. Replace the main control board. - Signals to Check - • Leak detection: CN201-1 or TP224 on I/O control board or TP162 on main control board Signals to Check - • Feedback signal: CN201-3 or TP226 on I/O control board or CN302-A4 or TP160 on main control board • PWM: CN201-4 or TP237 on I/O control board

← Xem tất cả mã lỗi Ricoh Aficio Color 3006

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie