Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC524 — Ricoh Aficio Color 3506

Code: SC524

Description: Duplex - End fence jogger H.P. error - Timing & Condition - • The home position is still detected a few seconds after the end fence leaves from the home position. • The home position is not detected 13 seconds after the end fence moves back to the home position.
Causes: • Duplex unit not set properly • Excessive load • Poor connection of connector • Defective end fence motor • Defective I/O control board
Remedy: 1. Pull out and re-insert the duplex unit. 2. Check the connector (CN486) is properly connected on the duplex control board. 3. Check if anything causes overload to the motor. 4. Replace the end fence motor (Output Check: SP 5-804 95 and 96). 5. Replace the I/O control board.

← Xem tất cả mã lỗi Ricoh Aficio Color 3506

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie