Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC557 — Ricoh Aficio Color 3506

Code: SC557

Description: Pressure roller temperature does not increase - Timing - Every 1 second, 2 minutes after the main switch turned on until the roller temperature reaches the ready condition - Condition - The pressure roller temperature does not increase by more than 3 °C for a minute during warm-up.
Causes: • Poor connection of connectors • Pressure roller fusing lamp brown • Pressure roller thermofuse opened • Defective main control board • Defective I/O control board
Remedy: 1. Check if the following connectors are properly connected: • Pressure roller fusing lamp connectors • CN303 on the main control board • CN206 and CN214 on the I/O control board 2. Replace the pressure roller fusing lamp if it is opened. 3. Replace the pressure roller thermofuse if it is opened. 4. Replace the main control board, I/O control board, or by checking the trigger signal at each pin. - Signals to Check - • Pressure roller fusing trigger: CN303-B7 on main control board / CN218-B5, or CN205-A5 on I/O control board.

← Xem tất cả mã lỗi Ricoh Aficio Color 3506

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie