Code: SC170
Description: Video processing error 1 - Timing - Just after the main switch is turned on (after auto gain control on the scanner IPU board) - Condition - The corrected CCD odd/even pixel black level difference is not in the proper range.
Causes: • Poor connection of CCD flat cable • Defective scanner IPU board • Defective CCD
Remedy: 1. Check if the flat cable is firmly connected at CN421 and CN404 on the SBU and scanner IPU board. 2. Check the continuity of the flat cable. 3. Replace the scanner IPU board. 4. Replace the SBU unit.