Code: SC192
Description: Bar code number mismatch - Timing - Just after the main switch is turned on - Condition - The main control board detects that the bar code data scanned in does not match the machine identification number stored in the RAM.
Causes: • Defective RAM board • Defective scanner IPU board • Defective main control board
Remedy: 1. Check if the serial number stored in the RAM is correct. NOTE:. Contact your product specialist for the detailed procedure. 2. Check the copier's serial number and the number defined in SP mode. 3. Garbled ROM data: Replace the NV-RAM. 4. Replace the scanner IPU board. 5. Replace the main control board.