Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC322 — Ricoh Aficio Color 4506

Code: SC322

Description: Laser synchronizing signal error - Timing & Condition - While the polygon motor is running and the laser diode is on, the LD main control board does not receive the laser synchronizing signal.
Causes: • Poor connection of connectors • Defective laser synchronizing detector board • Improper laser beam axis • Defective LD control board • Defective main control board • Defective optic housing unit
Remedy: 1. Check if the connectors (CN 604) are properly connected on the laser synchronizing detector board and LD main control board 2. Remove and clean the synchronizing detector board. 3. Check if anything such as the seal of the barrel toroidal lens in the optic housing unit interferes with the laser beam axis. 4. Replace the synchronizing detector board. 5. Check if the cable connectors (CN1 & CN605) on the LD drive board and LD main control board are properly connected or check the continuity of the cable. 6. Check if the cable connectors (CN601 & CN306) on the LD main control board and main control board are properly connected or check the continuity of the cable. 7. Replace the LD main control board. 8. Replace the main control board 9. Check the optical housing unit or replace it.

← Xem tất cả mã lỗi Ricoh Aficio Color 4506

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie