Code: SC385
Description: ID sensor VSG adjustment error - Timing - During process control self check, the main control board detects that the Vsg signal fed back from the ID sensor is out of range.
Causes: • Dirty ID sensor • Poor connection of connector • Defective ID sensor • Poor cleaning
Remedy: 1. Clean the ID sensor. 2. Check if the sensor connector is properly connected. 3. Replace the ID sensor. 4. Check the drum cleaning unit. - Signals to Check - • ID sensor LED: CN203-B9 or TP252 on I/O control board • ID sensor 1 (K ): CN203-B10 or TP227 on I/O control board / TP174 on main control board. • ID sensor 2 (CMY): CN203-B11 or TP229 on I/O control board / TP173 on main control board.