Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC400 — Ricoh Aficio Color 4506

Code: SC400

Description: Image transfer belt bias error - Timing - When the image transfer belt bias is on during printing or a process control self check - Condition - The feedback voltage is 4.8V or higher, or the PWM value is 50% or higher (indicating a leak) for 500 ms continuously.
Causes: • Poor connection of connectors • Defective high voltage supply board (T1,PCC) • Defective I/O control board • Defective main control board
Remedy: 1. Check if the connectors of high voltage cables and trigger lines are properly connected on the high voltage supply board, I/O control board, and main control board. 2. Clean the bias terminals. 3. Replace the high voltage supply board (T1,PCC). 4. Replace the I/O control board. 5. Replace the main control board. - Signals to Check - • Feedback signal: CN277-B3, TP221, or CN214-A4 on I/O control board / CN302-A6 or TP158 on main control board. • PWM: CN227-B4 or TP209 on I/O control board.

← Xem tất cả mã lỗi Ricoh Aficio Color 4506

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie