Code: SC502
Description: 2nd paper tray error - Timing & Condition - • The upper limit sensor does not turn on1.5 s after the tray bottom plate starts to go up.
Causes: • Defective upper limit sensor • Defective tray bottom plate • Defective I/O control board • Defective main control board
Remedy: 1. Check if the spring of pick-up solenoid comes off. 2. Check if the sensor cable is properly connected. 3. Clean or replace the sensor and replace it if necessary (Input Check: SP 5-803-14 to 17). 4. Replace the tray bottom lever if it is broken. 5. Pull out the paper tray and check if the tray lift motor works properly (Output Check: SP 5-804-75 to 82). 6. Replace the I/O control board. 7. Replace the main control board. - Signals to Check - • Limit sensor H.P.: CN226-2 or TP206 on I/O control board