Code: SC173
Description: Lamp regulator adjustment error - Definition - [B] When performing the AGC with the lamp voltage at 72 V, the CCD output does not exceed 1 V.
Causes: If the exposure lamp lights during AGC • White plate on the exposure glass not properly positioned • Dirty white plate, reflectors, mirrors, or lens • Poor connection between lamp regulator and scanner drive board (CN105) or between scanner control board and scanner drive board (CN101) • Exposure lamp deteriorated • CCD board defective • Scanner or mirrors not properly positioned • Lamp regulator defective or poor connection (CN3) • Scanner control board defective or poor connection (CN106) If the exposure lamp does not light during AGC • Poor connection between lamp regulator and scanner drive board (CN105) or between scanner control board and scanner drive board (CN101) • No ac input to lamp regulator (CN1) - AC drive board or main power relay defective • Lamp regulator defective or poor connection (CN3) • Scanner control board defective or poor connection (CN106)