Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC172 — Ricoh Aficio Color 6010

Code: SC172

Description: Video processing error 3 - Timing - When the main switch is turned on (after auto gain control at scanner IPU board) - Condition - The white level corrected is not in the proper.
Causes: • Poor connection of CCD harness • Dirty optics • Defective lamp regulator • Defective main scanner IPU board • Defective CCD
Remedy: 1. Check SP 4-426-001 to 006 (RGB Gain). If the value of them is close to “255”, clean the optics section (exposure glass, white plate, mirrors, and lens). 2. Visually check if the exposure lamp turns on during warming-up after the main switch is turned on. If not, replace the lamp regulator. 3. Check if the CCD flat cable is firmly connected at CN501 and CN404 on the CCD and scanner main IPU board. 4. Check the continuity of the flat cable. 5. Replace the main scanner IPU board. 6. Replace the CCD board as the lens unit.

← Xem tất cả mã lỗi Ricoh Aficio Color 6010

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie