Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC303 — Ricoh Aficio Color 6010

Code: SC303

Description: Charge cleaner motor error - Timing - When the charge cleaner starts - Condition - • Over-current is detected for 10 seconds when the cleaner pads start moving from rear to front. • Over-current is still not detected 1 minute after the cleaner motor turns on.
Causes: • Poor connection of connector • Defective cleaner motor • Cleaner pad locked • Defective I/O control board • Defective main control board
Remedy: 1. Check if the connectors (CN861 & CN829) are firmly connected. 2. Check if the charge corona unit is properly set. 3. Clean the screw shaft if it is dirty. 4. Check if the cleaner pad is mechanically locked. 5. Check if the connector is firmly connected on the I/O control board (CN219). 6. Replace the I/O control board. 7. Replace the main control board.

← Xem tất cả mã lỗi Ricoh Aficio Color 6010

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie