Code: SC690
Description: Application selection error - Timing & Condition - When the main CPU communicates with CPUs on other PCBs, main CPU does not receive response from others.
Causes: • Scanner IPU firmware upgrade • Poor connection of connectors • Defective main scanner IPU board • Defective main control board • Defective TD sensor I/F board 1 • Main board(s) of options
Remedy: • This SC code will be displayed when the scanner IPU firmware is changed. Turn off the main switch and disconnect the IC card; then, turn on the main switch. 1. Check if the connectors on the main control board, sub scanner IPU board, TD sensor I/F board 1, and the main board on each option equipped are properly connected. 2. Replace the defective board(s).