Code: SC725
Description: Sorter: Stapler motor error - Timing & Condition - The stapler H.P. sensor does not activates within the timing programmed. When this error detected twice, this SC code is displayed.
Causes: • Staple jam • Excessive sheets of paper stapled • Poor connection of connectors • Defective stapler H.P. sensor • Defective staple motor • Defective main board
Remedy: 1. Remove the staple(s) jammed if it causes SC. 2. Instruct user how many sheets can be stapled as maximum. 3. Check if the connectors of the staple H.P. sensor and/or staple unit motor are properly connected. 4. Replace the stapler H.P. sensor. (Input check: SP 5- 803-131) 5. Replace the stapler motor. (Output check: SP 5-804- 129) 6. Replace the main board