Code: SC450
Description: Paper transfer bias current error - Timing - When the paper transfer bias turns on during printing process - Condition - The feedback voltage is 4.8V or higher, or PWM value is 50% or higher for 500ms continuously.
Causes: • Defective high voltage supply (T2) • Defective I/O control board • Defective main control board • When the paper transfer belt does not touch with the image transfer belt and the paper transfer belt bias is ON
Remedy: 1. Check if the paper transfer belt unit moves up and touch with the image transfer belt during copy cycle properly. 2. Check if the connectors of high voltage cable and trigger lines are properly connected on the high voltage supply board (T2), I/O control board, and main control board. 3. Replace the high voltage supply board (T2). 4. Replace the I/O control board. 5. Replace the main control board. [ Signal Check ] • Feedback signal: CN221-A1, TP172, or CN211-A3 on I/O control board / CN302-A7 or TP105 on the main control board • PWM: CN221-A2 or TP138 on I/O control board