Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC501 — Ricoh Aficio Color 6110

Code: SC501

Description: 1st paper tray error - Timing & Condition - • The upper limit sensor stays HIGH when the pick-up solenoid turns off. • The upper limit sensor stays LOW 1.5 seconds after the tray bottom plate goes down. • The upper limit sensor stays HIGH 10 seconds after the tray bottom plate goes up. • The upper limit sensor stays HIGH 3 seconds after the tray bottom plate goes up again.
Causes: • Pick-up solenoid spring come off • Defective upper limit sensor • Defective tray bottom plate • Defective tray lift motor • Defective I/O control board • Defective main control board
Remedy: 1. Check if the spring of pick-up solenoid comes off. 2. Check if the sensor harness is properly connected. 3. Clean or replace the sensor and replace it if necessary (Input Check: SP 5-803-014 to 017). 4. Replace the tray bottom lever if it is broken. 5. Pull out the paper tray and check if the tray lift motor works properly (Output Check: SP 5-804-75 to 82) 6. Replace the I/O control board. 7. Replace the main control board. [ Signal Check ] • Limit sensor H.P.: CN224-A8 or TP215 on I/O control board

← Xem tất cả mã lỗi Ricoh Aficio Color 6110

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie