Code: SC731
Description: Sorter: Staple unit motor error - Timing & Condition - The staple unit H.P. sensor does not activates within the timing programmed. When this error detected twice, this SC code is displayed.
Causes: • Poor connection of connectors. • Defective staple unit H.P. sensor • Defective grip shift motor • Defective main board
Remedy: 1. Check if the connectors of the staple unit H.P. sensor and/or staple unit motor are properly connected. 2. Replace the staple unit motor H.P. sensor. (Input check: SP 5-803-130) 3. Replace the staple unit motor. (Output check: SP 5- 804-128) 4. Replace the main board.