Code: SC191
Description: Bar code scan error - Timing - When the main switch is turned on - Condition - The main scanner IPU board detects that the pattern of the bard code scanned in is not appropriate.
Causes: • Non-standard bar code label • Improper location of bar code • Dirty bar code • Defective main scanner IPU board • Defective main control board
Remedy: 1. Check if the bar code is damaged or scratched. 2. Clean the optics section such as mirrors and lens and bar code. 3. Check if the mirrors are properly set on the 1st and 2nd scanners. If the spring plate, which is fix the position of mirrors, is out of position, it causes the light axis to change. 4. Replace the main scanner IPU board. 5. Replace the main control board.