Code: SC323
Description: LD error - Timing - During LD writing - Condition - LD control boards detects the over-current, or there is no feedback signal from LD unit.
Causes: • Poor connection • Defective LD unit • Defective LD control board • Defective main control board
Remedy: 1. Make sure the connectors (CN1 & CN603) on the LD unit and LD control board are properly connected. 2. Check the continuity of the harness. 3. Make sure the harness connectors (CN604 & CN306)on the LD control board and main control board are properly connected. 4. Replace the LD unit. 5. Replace the LD control board 6. Replace the main control board.