Code: SC351
Description: TD Sensor Failure - Timing - During the printing process or the process control selfcheck - Condition - The main control board does not receive the TD sensor output or receive wrong data 4 times continuously.
Causes: • Poor connection • Defective TD sensor • Defective TD sensor interface board 2 • Defective main control board
Remedy: 1. Make sure the connectors on the TD sensor interface board 2 (revolver) and the TD sensor and slip ring are properly connected. 2. Check if the harnesses is damaged. 3. Replace the TD sensor. 4. Replace the TD sensor interface board 2. 5. Replace the TD sensor interface board 1. 6. Replace the main control board.