Code: SC690
Description: Application selection error - Timing & Condition - When the main CPU communicates with CPUs on other PCBs, but the main CPU does not receive response from the others.
Causes: • Scanner IPU firmware upgrade • Poor connections • Defective main scanner IPU board • Defective main control board • Defective TD sensor I/F board 1 • Main board options
Remedy: • This SC code will be displayed when the scanner IPU firmware is changed. Turn off the main switch and disconnect the IC card. Then turn on the main switch. 1. Check the connectors on the main control board, sub scanner IPU board, TD sensor I/F board 1, and the main board for each option. 2. Replace the defective board(s).