Code: SC725
Description: Sorter: Stapler motor error - Timing & Condition - The stapler H.P. sensor does not activate as expected. When this error is detected twice, this SC code is displayed.
Causes: • Staple jam • Excessive sheets of paper stapled • Poor connections • Defective stapler H.P. sensor • Defective staple motor • Defective main board
Remedy: 1. Remove any staple jams. 2. Instruct the user on how many sheets may be stapled safely. 3. Make sure the staple H.P. sensor and staple unit motor are properly connected. 4. Replace the stapler H.P. sensor. (Input check: SP5-803-131) 5. Replace the stapler motor. (Output check: SP5-804-129) 6. Replace the main board.