Code: SC742
Description: Finisher Stapler Movement Motor Error: 3K Finisher B830
The stapler did not return to its home position within the specified time after stapling. -or- The stapler failed to leave the home position within the specified time The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
The stapler did not return to its home position within the specified time after stapling. -or- The stapler failed to leave the home position within the specified time The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • If the motor is running, 1 Stapler home position sensor harness is broken, loose, or defective 2 Stapler home position sensor is defective
• If the motor is not running: 1 Motor is blocked by an obstruction 2 Motor harness is loose, broken, defective 3 Motor is defective
• If the motor is not running: 1 Motor is blocked by an obstruction 2 Motor harness is loose, broken, defective 3 Motor is defective