Code: SC438
Description: Drum Potential Sensor Error 5: ID Sensor Pattern Potentia
When the ID sensor potential (Vp) was measured after a cold start, or at the end of a job, the total of this reading and the value of the setting of SP2201 004 did not exceed 800V (development unit power pack output) after 10 continuous samplings.
When the ID sensor potential (Vp) was measured after a cold start, or at the end of a job, the total of this reading and the value of the setting of SP2201 004 did not exceed 800V (development unit power pack output) after 10 continuous samplings.
Causes: • Drum potential sensor defective
• BCU defective
• IOB defective
• Poor drum unit connection or connectors defective
• Poor drum ground connection
• LD defective
• Poor drum cleaning ground connection
• Drum worn
• Dirty laser optics
• BCU defective
• IOB defective
• Poor drum unit connection or connectors defective
• Poor drum ground connection
• LD defective
• Poor drum cleaning ground connection
• Drum worn
• Dirty laser optics