Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 85 — Brother DCP8085DN

Code: 85

Description: Tray 1 is not installed into the machine
Causes: 1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
Remedy: 1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure Check the sensor performance following the procedure described in “Maintenance mode 32”. If any problem occurs, replace the T1 PE/edge sensor PCB failure/T2 PE/ edge sensor PCB. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. Check the harness connection of the T1 PE/edge sensor PCB/T2 PE/edge sensor PCB. and reconnect it. 3 Main PCB failure Replace the main PCB ASSY. 4 Connector 55533-1219 failure (only Tray 2) Replace the connector 55533-1219.

← Xem tất cả mã lỗi Brother DCP8085DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie