Code: 202-00
Description: Polygon motor: ON timeout error Polygon motor locking has not been detected when 7 seconds have elapsed after the machine turned the polygon motor ON.
Causes: • The interface harness to the polygon motor driver damaged or not connected correctly. • Polygon motor or polygon motor driver defective • Polygon motor drive pulse cannot be output correctly. (Polygon controller)
Remedy: • Check the harness of the laser unit (disconnected, etc.). • Check if the laser unit connector is connected. • Check if the PSU 24 V power is output. • Replace the interface harness of the laser unit. • Replace the laser unit. • Replace the MPU • Replace the PSU