Code: 351-00
Description: ID sensor error: Vsg measurement error (detailed)
Causes: Only when the following two conditions are met during the ID sensor detection (only when the SP5-995-001 is set to “1”). • Vsg is 5V and LED drive current is minimum (PWM=0). • ID sensor defective • ID sensor harness damaged. • ID sensor not connected correctly. • MPU defective • Laser unit defective • Imaging density fault • HVPS board defective
Remedy: • Clean the ID sensor • Replace the ID sensor. • Replace and reset the ID sensor harness. • Replace the MPU. • Replace the HVPS board.