Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 120-00 — Ricoh Aficio MP2014AD

Code: 120-00

Description: Scanner home position error 1
Causes: • The scanner home position sensor does not go OFF even if the scanner moves 30 mm at homing. • The scanner home position sensor does not go OFF even if the scanner moves 13 mm at the white balance adjustment. • The scanner home position sensor goes ON before the scanner reaches the specified position (in the sensor OFF area) at returning from the scanning position. • This SC is issued only when the error signal of the scanner HP sensor is detected three times consecutively to prevent the sensor detection error due to some noise. • Motor driver defective • Motor defective • Scanner HP sensor defective • Harness defective • Timing belt, pulley, wire, or carriage not installed correctly
Remedy: 1. Perform the following operations. • Check the harness. • Check the timing belt, pulley, wire, or carriage installation. 2. Replace the following parts. • Replace the scanner motor. • Replace the scanner HP sensor.

← Xem tất cả mã lỗi Ricoh Aficio MP2014AD

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie