Code: 350-00
Description: ID sensor error (detailed) One of the conditions below occurs during the ID sensor detection (only when the SP5-995-001 is set to “1”)
Causes: • Vsp > 2.5V • Vsg < 2.5V • Vsp = 0V • Vsg = 0V • ID sensor defective • ID sensor harness damaged. • ID sensor not connected correctly. • MPU defective • Laser unit defective • Imaging density fault • HVPS board defective • ID sensor dirt
Remedy: • Clean the ID sensor • Replace the ID sensor. • Replace and reset the ID sensor harness. • Replace the MPU. • Replace the HVPS board.