Code: 101-01
Description: Lamp error (scanning) The white level peak did not reach the prescribed threshold when the white plate was scanned.
Causes: • CIS defective • MPU defective • Harness defective • Condensation in the scanner unit • CIS dirty or positioned incorrectly • White plate dirty or positioned incorrectly
Remedy: 1. Perform the following operations. • Reconnect the harness of the CIS. • Reattach or clean the CIS. • Reattach or clean the white plate. 2. Replace the following parts. • Replace the CIS. • Replace the MPU. • Replace the harness of the CIS.