Code: 203-00
Description: Polygon motor: OFF timeout error Polygon motor has not stopped when 3 seconds have elapsed after the machine turned the polygon motor OFF.
Causes: • The interface harness to the polygon motor driver damaged or not connected correctly. • Polygon motor or polygon motor driver defective • Polygon motor drive pulse cannot be output correctly.
Remedy: • Check the harness of the laser unit (disconnected, etc.). • Check if the laser unit connector is connected. • Check if the PSU 24 V power is output. • Replace the interface harness of the laser unit. • Replace the laser unit. • Replace the MPU. • Replace the PSU