Code: 354-00
Description: ID sensor: Auto adjustment timeout error (detailed) If Vsg is not automatically adjusted to 4.0±0.2 V twice consecutively when the ID sensor is adjusting Vsg automatically, this SC is issued (only when the SP5-995-001 is set to “1”).
Causes: • ID sensor defective • ID sensor harness damaged. • ID sensor not connected correctly. • MPU defective • Laser unit defective • Imaging density fault • HVPS board defective • ID sensor dirt
Remedy: • Clean the ID sensor. • Replace the ID sensor. • Replace and reset the ID sensor harness. • Replace the MPU. • Replace the HVPS board.