Code: SC503-33
Description: 3rd Tray Paper Overload Error (LCIT: D695) Both of the upper limit and lower limit detects the base plate 3 times consecutively at the machine’s initialization. (The message of resetting the tray is displayed when the both sensors detect the error consecutively 2 times or less.)
Causes: • Paper overload • Paper set fault • Limit sensor harness disconnected or broken • Lower limit sensor harness disconnected or broken • Control board defective • Foreign matter, such as paper scrap, is caught inside the right tray.
Remedy: • Reset the paper. • Remove the foreign matter. • Reset the connector. • Replace the harness. • Replace the limit sensor. • Replace the lower limit sensor. • Replace the control board for the LCIT (D695).