Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC391-00 — Ricoh Aficio MP3054

Code: SC391-00

Description: High Voltage Power Source: Development : Output Error When the machine detects the error detection signal “L (abnormal)” 10 times for 200 ms consecutively by monitoring the error ditection signal every 20ms during output of the PWM signal used as an error detection target.
Causes: Hardware error • Input / Output connector is disconnected. • Surface/air clearance insufficient (arc discharge) • Input / Output harness is short-circuited. • BCU error (signal error) • HVPS defective Load error • Grounding fault of charging output, short-circuit with other outputs • Surface/air clearance insufficient in charging output path (including distance from other outputs) • Unexpected deterioration of drum, and over current due to pinholes • Over current due to drum surface condensation • PCDU is not set properly.
Remedy: • Cycle the main power off/on • Replace the harness between the BCU and HVPS. • Reconnect or replace the harness between the BCU and HVPS. • Reinstall or replace the development unit. • Check if the contact and separation movement of the transfer works correctly. • Replace the HVPS. • Replace the BCU.

← Xem tất cả mã lỗi Ricoh Aficio MP3054

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie