Code: 722-42
Description: 1000-Sheet Finisher Error: Stapler movement motor
The 1st detection failure issues a jam error, and the 2nd failure causes this SC code. The stapler HP sensor is not activated within the specified time after the stapler motor turned on.
The 1st detection failure issues a jam error, and the 2nd failure causes this SC code. The stapler HP sensor is not activated within the specified time after the stapler motor turned on.
Causes: Stapler or motor drive is blocked by obstruction
Motor harness loose or broken
Stapler HP sensor harness loose, broken
Motor defective
Stapler HP sensor defective
Motor harness loose or broken
Stapler HP sensor harness loose, broken
Motor defective
Stapler HP sensor defective