Code: SC505-43
Description: Side LCIT Paper Overload Error (D696) During tray initialization, both the upper limit and lower limit are detected for 3 times consecutively. (The message of resetting the tray is displayed when the both sensors detect the error consecutively 2 times or less.)
Causes: • Paper overload • Paper set fault • Limit sensor error/connector missing • Lower limit sensor error/connector missing • Harness broken • Bank control board defective • Foreign matter, such as paper scrap, is caught inside the tray
Remedy: • Reset the paper. • Remove the foreign matter. • Reset the connector. • Replace the harness. • Replace the sensor. • Replace the control board for the optional side LCT.