Code: SC724-25
Description: Internal Finisher Error Punch Motor Error (Internal finisher) • When punch motor is driven for predetermined seconds after punch HP sensor ON, the HP sensor does not switch OFF (1st time is jam notification, 2nd time is SC notification). • When punch motor is driven for predetermined seconds after punch HP sensor OFF, the HP sensor does not switch ON (1st time is jam notification, 2nd time is SC notification).
Causes: • Motor defective • Connector disconnected • Motor overload • Home position sensor error • Paper surface sensor error (*SC724-38, 70 only) • Staple jam (*SC724-86 only)
Remedy: • Reset the connector • Replace the motor • Replace the sensor • Replace the harness • Remove the staple jam (*SC724-86 only)