Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 91 — Brother DCP9010CN

Code: 91

Description: Size mismatch
Causes: 1 Lift arm and roller holder ASSY not assembled correctly. 2 Harness connection failure of registration front/rear sensor PCB ASSY. 3 Plate-up function malfunction. 4 Registration front sensor failure. 5 HVPS control PCB failure. 6 Main PCB failure.
Remedy: 1 Lift arm and roller holder ASSY not assembled correctly Be sure to put the boss of the roller holder ASSY into the hole on the lift arm securely. 2 Harness connection failure of registration front/rear sensor PCB ASSY Check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it. 3 Plate-up function malfunction Replace the paper tray. 4 Registration front sensor failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the registration front/rear sensor PCB ASSY. 5 HVPS control PCB failure Replace the HVPS control PCB ASSY. 6 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9010CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie