Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi FE — Brother DCP9010CN

Code: FE

Description: Detection of incorrect measurement value of density sensor sensitivity calibration
Causes: 1 Belt unit failure. 2 Harness connection failure of registration mark L PCB ASSY. 3 Registration mark relay PCB failure. 4 Main PCB failure. 5 Registration mark L PCB failure.
Remedy: 1 Belt unit failure Replace the belt unit. 2 Harness connection failure of registration mark L PCB ASSY Check the harness connection of the registration mark L PCB ASSY and reconnect it. 3 Registration mark relay PCB failure Replace the registration mark relay PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY. 5 Registration mark L PCB failure Replace the registration sensor holder ASSY.

← Xem tất cả mã lỗi Brother DCP9010CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie