Code: 720-41
Description: 2000/3000-Sheet (booklet) Finisher Error: Stack feed-out motor error
The stack feed-out HP sensor does not detect the home position of the stack feed-out belt 3000ms after the stack feed-out belt has moved to its home position.
The stack feed-out HP sensor does not turn off 200 ms after the stack feed-out belt has moved from its home position.
The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
The stack feed-out HP sensor does not detect the home position of the stack feed-out belt 3000ms after the stack feed-out belt has moved to its home position.
The stack feed-out HP sensor does not turn off 200 ms after the stack feed-out belt has moved from its home position.
The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: Defective stack feed-out HP sensor
Overload on the stack feed-out motor
Defective stack feed-out motor
Defective main board
Disconnected or defective harness
Overload on the stack feed-out motor
Defective stack feed-out motor
Defective main board
Disconnected or defective harness