Causes: [0F30] [0F31] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the IPU. [0F41] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the IPU. [50B1] Could not initialize or read the bus connection. Check for loose connections at the mother board. Replace the IPU. [50B2] Value of the SSCG register is incorrect. Check for loose connections at the mother board. Replace the IPU.