Code: 121
Description: Scanner home position error 2
The scanner HP sensor does not detect the off condition during initialization or copying.
The scanner HP sensor does not detect the off condition during initialization or copying.
Causes: • BCU, SDRB (Scanner Driver Board) defective
• Scanner motor defective
• Harness between BCU, SDRB, scanner motor disconnected
• Scanner HP sensor defective
• Harness between scanner HP sensor and BCU disconnected
• Scanner wire, timing belt, pulley, carriage installed incorrectly.
• Scanner motor defective
• Harness between BCU, SDRB, scanner motor disconnected
• Scanner HP sensor defective
• Harness between scanner HP sensor and BCU disconnected
• Scanner wire, timing belt, pulley, carriage installed incorrectly.